Conference article

Towards Consolidation on Product-Service Systems Design

Patrick Müller
Dept. Of Machine Tools and Factory Management, TU Berlin, Berlin, Germany

Tomohiko Sakao
Dept. Of Management and Engineering, Linköping University, Linköping, Sweden

Download article

Published in: Proceedings of the 2nd CIRP IPS2 Conference 2010; 14-15 April; Linköping; Sweden

Linköping Electronic Conference Proceedings 77:28, p. 219-225

Show more +

Published: 2012-10-11

ISBN: 978-91-7393-381-0

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

No abstract available

Keywords

No keywords available

References

[1] R. Knackstedt; J. Pöppelbuß; A. Winkelmann; 2008; Integration von Sach- und Dienstleistungen – Ausgewählte Internetquellen zur hybriden Wertschöpfung; Wirtschaftsinformatik; DOI 10.1365/s11576-008-0050-0.

[2] G. Salvendy W. Karwowski; eds. Introduction to Service Engineering. 2009; Wiley. 720.

[3] T. Sakao M. Lindahl; eds. Introduction to Product/Service-System Design. Springer’s global publishing programme in engineering and management. 2009; Springer: London. approx. 300.

[4] Bains; T.S.; Lightfoot; H.W.; Evans; S.; Neely; A.; Greenrough; R.; Peppard; J.; Roy; R.; Shehab; E.; Braganza; A.; Tiwari; A.; Alcock; J.R.; Angus; J.P.; Bastl; M.; Cousens; A.; Irving; P.; Johnson; M.; Kingston; J.; Lockett; H.; Martinez; V.; Michele; P.; Tranfield; D.; Walton; I.M..; Wilson; H.; 2007; Stateof- the-art in product-service systems. In Proceedings of ImechE; Vol 221; Part B: J. Engineering Manufacture:1543-1552.

[5] Mont; O.; 2002; Clarifying the concept of productservice system; Journal of Cleaner Production; 10: 237-245.

[6] Å. Ericson; P. Müller; T. Larsson; R. Stark; 2009; Product-Service Systems – From Customer Needs to Requirements in Early Development Phases; CIRP IPS2 Conference; Cranfield.

[7] P. Müller; N. Kebir; R. Stark; L. Blessing; 2009; PSS Layer Method - Application to Microenergy Systems; In: Introduction to Product/Service-System Design; Sakao and Lindahl; Editors. Springer: London.

[8] T. Tomiyama; 2001; Service Engineering to Intensify Service Contents in Product Life Cycles; Research in Artifacts; Center for Engineering; The University of Tokyo.

[9] D. Matzen; T. Sakao; G. Ö. Sandström; 2007;Design Research on Manufacturing Firms Moving from Products to Services. In 16th International Conference on Engineering Design; Paris.

[10] DIN working group; 2009; Product-Service Systems – Value Creation by Integrating Goods and Services. Public Available Specification 1094; DIN PAS 1094.

[11] T. Alonso-Rasgado; G. Thompson; B. Elfstrom; 2004; The design of functional (total care) products; Journal of Engineering Design; 15: 515-540.

[12] A. Doultsinou; R. Roy; D. Baxter; J. Gao; A. Mann; 2009; Developing a service knowledge reuse framework for engineering design; Journal of Engineering Design; 20: 389 – 411.

[13] S. K. Moon; T. W. Simpson; J. Shu; S. R. T. Kumara; 2009; Service representation for capturing and reusing design knowledge in product and service families using object-oriented concepts and an ontology; Journal of Engineering Design; 20: 413 – 431.

[14] T. Hara; T. Arai; Y. Shimomura; 2009; A CAD system for service innovation: integrated representation of function; service activity; and product behaviour; Journal of Engineering Design; 20: 367-388.

[15] T. Sakao; Y. Shimomura; E. Sundin; M. Comstock; 2009; Modeling Design Objects in CAD System for Service/Product Engineering; Computer-Aided Design; 41: 197-213.

[16] H. Komoto T. Tomiyama; 2009; Systematic generation of PSS concepts using a service CAD tool; In: Introduction to Product/Service-System Design; Sakao and Lindahl; Editors. Springer: London. In print.

[17] T. Sakao; G. Ö. Sandström; D. Matzen; 2009;Framing research for service orientation through PSS approaches; Journal of Manufacturing Technology Management; 20: 754-778.

[18] D. Kindström C. Kowalkowski; 2009; Development of industrial service offerings: a process framework; Journal of Service Management; 20: 156-172.

[19] T. Fischer; H. Gebauer; A. Gustafsson; L. Witell; 2009; Managerial recommendations for service innovations in different product-service systems; In: Introduction to Product/Service-System Design; Sakao and Lindahl; Editors. Springer: London.in print.

[20] A. Tan; T. McAloone; D. Matzen; 2009; Service- Oriented Strategies for Manufacturing Firms; In: Introduction to Product/Service-System Design; Sakao and Lindahl; Editors. Springer: London.in print.

[21] P. Thollander; J. Palm; T. Sakao; 2010; Increasing industrial energy efficiency through energy services – an interdisciplinary approach with engineering- and social science aspects. In The 2nd CIRP International IPS2 Conference. Linköping

[22] S. Sorrell; J. Schleich; S. Scott; E. O’Malley; F. Trace; U. Boede; K. Ostertag; P. Radgen; Barriers to Energy Efficiency in Public and Private Organisations; 2000.

[23] Institute for Global Environmental Strategies (IGES); 2007; Business for Sustainable Society Project Summary Report.

[24] T. Levitt; Production-Line Approach to Service; in Harvard Business Review. 1972.

[25] S. Finger J. R. Dixon; 1989; A review of research in mechanical engineering design. Part I: Descriptive; prescriptive; and computer-based models of design processes Research in Engineering Design; 1: 51- 67.

[26] S. Finger J. R. Dixon; 1989; A review of research in mechanical engineering design. Part II: Representations; analysis; and design for the life cycle Research in Engineering Design; 1: 121-137.

[27] R. Roy D. Baxter; 2009; Special Issue - Product- Service Systems; Journal of Engineering Design; 20: 327 – 431.

[28] R. Roy; E. Shehab; D. Baxter; 2009; Special issue on Product-Service Systems; International Journal ofManufacturing Technology and Management; 20: 545-778.

[29] T. Sakao Y. Shimomura; 2007; Service Engineering: A Novel Engineering Discipline for Producers to Increase Value Combining Service and Product; Journal of Cleaner Production; 15: 590-604.

[30] J. C. Aurich; C. Fuchs; C. Wagenknecht; 2006; Life cycle oriented design of technical Product-Service Systems; Journal of Cleaner Production; 14: 1480- 1494.

[31] M. Dausch C. Hsu; 2006; Engineering service products: the case of mass-customising service agreements for heavy equipment industry; International Journal of Services Technology and Management; 7: 32 – 51

[32] J. Östlin; E. Sundin; M. Björkman; 2008; Importance of closed-loop supply chain relationships for product remanufacturing; International Journal of Production Economics; 115: 336-348.

[33] V. Panshef; E. Dörsam; T. Sakao; H. Birkhofer; 2009; Value-Chain-Oriented Service Management by Means of a ‘Two-Channel Service Model’; International Journal of Services Technology and Management; 11: 4-23.

[34] N. Maussang; P. Zwolinski; D. Brissaud; 2009; Product-service system design methodology: from the PSS architecture design to the products specifications; Journal of Engineering Design; 20: 349-366.

[35] J. C. Aurich; N. Wolf; M. Siener; E. Schweitzer; 2009; Configuration of product-service systems; Journal of Manufacturing Technology Management; 20: 591-605.

[36] T. Alonso-Rasgado G. Thompson; 2006; A rapiddesign process for Total Care Product creation;Journal of Engineering Design; 17: 509 - 531.

[37] N. Morelli; 2003; Product-service systems; a perspective shift for designers: A case study: the design of a telecentre; Design Studies; 24: 73-99.

[38] T. Sakao; H. Birkhofer; V. Panshef; E. Dörsam; 2009; An Effective and Efficient Method to Design Services: Empirical Study for Services by an Investment-machine Manufacturer; International Journal of Internet Manufacturing and Services; 2:

[39] E.-M. Molloy; C. Siemieniuch; M. Sinclair; 2009; Decision-making systems and the product-to-service shift; Journal of Manufacturing Technology Management; 20: 606-625.

[40] K. Kimita; Y. Shimomura; T. Arai; 2009; Evaluation of customer satisfaction for PSS design; Journal of Manufacturing Technology Management; 20: 654- 673.

[41] E. Sundin; M. Lindahl; W. Ijomah; 2009; Product Design for Product/Service Systems - Design Experiences from Three Manufacturing Companies from Sweden; Journal of Manufacturing Technology Management; 20: 723-753.

[42] S. Evans; P. J. Partidário; J. Lambert; 2007; Industrialization as a key element of sustainable product-service solutions; International Journal of Production Research; 45: 4225 - 4246.

[43] A. Tukker; 2004; Eight Types of Product-Service System: Eight Ways to Sustainability? Experiences from Suspronet; Business Strategy and the Environment; 13: 246 – 260.

[44] A. Azarenko; R. Roy; E. Shehab; A. Tiwari; 2009; Technical product-service systems: some implications for the machine tool industry; Journal of Manufacturing Technology Management; 20: 700- 722.

[45] A. Tukker; U. Tischner; 2006; New Business for Old Europe; Greenleaf Publishing; Sheffield.

[46] Å. M. Ericson T. C. Larsson; 2009; People; Product and Process Perspectives on Product/Service- System Development; In: Introduction to Product/Service-System Design; Sakao and Lindahl; Editors. Springer: London.in print.

[47] G. Allmendinger R. Lombreglia; Four Strategies for the Age of Smart Services in Harvard Business Review. 2005.

[48] H. J. Bullinger and A. W. Scheer; 2006; Service Engineering; 2nd Edition; Springer Verlag; ISBN: 10 0-3-540-25324-6.

[49] T. C. McAloone; 2007; Competence-Based Approach to Sustainable Innovation Teaching; Experiences within a New Engineering Program; Journal of Mechanical Design; ASME.

[50] T. C. McAloone; M. M. Andreasen; 2004; Design for Utility; sustainability and societal virtues: Developing Product Service Systems. Proceedings of the International Design Conference.

[51] V. A. Zeithaml; 1988; Consumer Perceptions of Price; Quality; and Value: A Means-End Model and Synthesis of Evidence. Journal of Marketing; Vol. 52; 2-22

8 WEB LINKS

[w1] The International PSS Design Research Community; http://www.pssdesignresearch.org/

[w2] IPSE; International Product and Service Engineering; project website; http://www.ipse.se

[w3] Transregio 29; Engineering of Industrial Product- Service Systems; project website; http://www.tr29.de

Last request of all websites on March 12th; 2010.

Citations in Crossref