Files:DescriptionFile size FormatBrowse
Fulltext1.17 MBPDF (requires Acrobat Reader)Previous | Next
  
Authors:Kourosh Mousavi Takami: Sharif institute of technology (TDI), Tehran, Iran \ Mälardalen University, Sweden
Publication title:Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions
Conference:The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007), 30-31 October, 2007, Göteborg (Särö)
Publication type: Abstract and Fulltext
Issue:027
Article No.:023
Abstract:Super heater elements concentrated in very high and clean power at temperature up to 1800 °c is needed for aluminium melting, oil drying equipment using for power transformers and same that material. There fore, always it is need to minimize power consumption and increase effectiveness at power reflector customers. This means to minimize heat losses in the High Power Reflector, and to optimize heat performance with respect to output power and temperature distribution. This can be done by altering the size and form of the insulating ceramic fiber to have as much power as possible ‘reflected’ out from the module. It can also be done by altering the size and form of the element .It has been done and the task solved mainly by heat transfer simulations, using COMSOL and MTLAB software’s. To minimize the number of different designs (and thus the number of calculations) were studied; it is also done that statistical methods for experimental design used to determine which designs should be used in the calculations. When an optimal solution has been found, it has been tested at factory’s facilities, with two reference designs.
Language:English
Keywords:Reflector, simulation, element
Year:2007
No. of pages:8
Pages:189-196
Series:Linköping Electronic Conference Proceedings
ISSN (print):1650-3686
ISSN (online):1650-3740
File:http://www.ep.liu.se/ecp/027/023/ecp072723.pdf
Available:2007-12-21
Publisher:Linköping University Electronic Press, Linköpings universitet

REFERENCE TO THIS PAGE
Kourosh Mousavi Takami (2007). Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions, The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007), 30-31 October, 2007, Göteborg (Särö) http://www.ep.liu.se/ecp_article/index.en.aspx?issue=027;article=023 (accessed 8/30/2014)