Article | Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018 | Gas Compressor System Simulation using Functional Mockup Interface for Human Machine Interface and Control Linköping University Electronic Press Conference Proceedings
Göm menyn

Title:
Gas Compressor System Simulation using Functional Mockup Interface for Human Machine Interface and Control
Author:
Ryan Magargle: ANSYS, Inc. USA Hemanth Kolera-Gokula: ANSYS, Inc. USA
DOI:
10.3384/ecp18148122
Download:
Full text (pdf)
Year:
2018
Conference:
Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018
Issue:
148
Article no.:
017
Pages:
122-126
No. of pages:
5
Publication type:
Abstract and Fulltext
Published:
2019-02-21
ISBN:
978-91-7685-266-8
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press, Linköpings universitet


Export in BibTex, RIS or text

This paper describes a gas compressor (GCS) system simulation for the purpose of verifying a controller’s operation and interfacing simulation with measured data. The GCS is used to collect and compress low pressure gas streams for transmission into larger higherpressure lines. This system is simulated with ANSYS TwinBuilder. It includes models of the compressor, motor, bypass valve, and piping along with pressure sources for the low and high-pressure lines, which are controlled with measured or test data. To cycle and pressurize the GCS, a controller is implemented using an FMU from ANSYS SCADE. To interact with the system and monitor current operating conditions, a human machine interface (HMI) is also implemented using ANSYS SCADE as an FMU.

Keywords: digital twin, vapor recovery unit, FMI, ANSYS, TwinBuilder, SCADE, control, HMI, Rapid Prototyper

Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018

Author:
Ryan Magargle, Hemanth Kolera-Gokula
Title:
Gas Compressor System Simulation using Functional Mockup Interface for Human Machine Interface and Control
DOI:
http://dx.doi.org/10.3384/ecp18148122
References:

ANSYS, Inc, Canonsburg, PA. (2017). TwinBuilder. http://www.ansys.com.

ANSYS, Inc, Canonsburg, PA. (2017). SCADE. http://www.ansys.com.

S.E. Haaland. Simple and Explicit Formulas for the Friction Factor in Turbulent Pipe Flow. J. Fluids Eng, 105(1): 89-
90, 1983. doi: 10.1115/1.3240948

K-I Funahashi. On the approximate realization of continuous mappings by neural networks. Neural Networks, 2(3): 183-
192, 1989. doi: 10.1016/0893-6080(89)90003-8

Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018

Author:
Ryan Magargle, Hemanth Kolera-Gokula
Title:
Gas Compressor System Simulation using Functional Mockup Interface for Human Machine Interface and Control
DOI:
https://doi.org10.3384/ecp18148122
Note: the following are taken directly from CrossRef
Citations:
No citations available at the moment


Responsible for this page: Peter Berkesand
Last updated: 2019-11-06