Article | Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56), October, 7-9, 2015, Linköping University, Sweden | Near Well Simulation of CO2 Injection for Enhanced Oil Recovery (EOR)
Göm menyn

Title:
Near Well Simulation of CO2 Injection for Enhanced Oil Recovery (EOR)
Author:
L.B.J. Chathurangani: Telemark University College, Faculty of Technology, Norway Britt M. Halvorsen: Telemark University College, Faculty of Technology, Norway
DOI:
10.3384/ecp15119309
Download:
Full text (pdf)
Year:
2015
Conference:
Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56), October, 7-9, 2015, Linköping University, Sweden
Issue:
119
Article no.:
031
Pages:
309-318
No. of pages:
10
Publication type:
Abstract and Fulltext
Published:
2015-11-25
ISBN:
978-91-7685-900-1
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press, Linköpings universitet


Export in BibTex, RIS or text

A major challenge in oil industry is the declining oil production and the relatively low recovery rate. Estimates show that although the oil is localized and mobile, more than half of the oil is remaining in the reservoir after shut down. There are therefore strong incentives for using CO2 injection for Enhanced Oil Recovery (EOR) for mature oil reservoirs with significant volume of residual oil. Injection of CO2 to reservoirs can also solve the demand for CO2 storage and contribute to reduce the emission of greenhouse gases. In general CO2 is injected to the reservoir as a supercritical fluid which has mobility similar to a gas but density similar to a liquid. Therefore supercritical CO2 behaves as an effective solvent for many oils. Miscible CO2 flooding can be performed for oil having lower viscosities which is capable of increasing the oil mobility. Generally CO2 is not miscible with crude oil on first contact. But at sufficiently high pressures and temperatures, it achieves miscibility with oil. The minimum pressure at which CO2 and oil are completely mixed with each other at any proportion is called as the minimum miscibility pressure (MMP). When reservoir oil contacts the injected CO2, the oil begins to dissolve into the dense CO2 phase and the dense CO2 begins to dissolve into the oil phase. Eventually the oil and the injected CO2 become a single phase due to repeated contacts with time. Dissolving CO2 in oil leads to interfacial tension reduction and promotes more oil recovery. CO2 also causes oil swelling and due to that trapped oil droplets move out of the rock pores and move towards the production wells. Oil viscosity reduction is another advantage of CO2 flooding and the amount of reduction is more significant in high viscous oils. Due to the acid effect on the rock formation as a result of CO2 flooding, reservoir properties such as porosity and permeability can be altered. In this work near well simulations have been performed using the software Rocx in combination with OLGA. The relative permeability is essential in simulations of oil reservoirs. When CO2 is injected to the reservoir, the relative permeability and the residual oil saturation change. The relative permeability is given as input to Rocx. A better understanding of reservoir conditions when CO2 is injected to the reservoir is needed. Near well simulations have been performed with CO2 injection and without CO2 injection to study the increase in oil recovery. Different permeability curves and residual oil saturations have been included for the two cases, and the results show clearly that additional oil can be produced by performing CO2-EOR.

Keywords: Enhanced oil recovery; OLGA simulation; miscible CO2 flood; relative permeability

Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56), October, 7-9, 2015, Linköping University, Sweden

Author:
L.B.J. Chathurangani, Britt M. Halvorsen
Title:
Near Well Simulation of CO2 Injection for Enhanced Oil Recovery (EOR)
DOI:
http://dx.doi.org/10.3384/ecp15119309
References:

Administration, US Energy Information. 2014."International Energy Statistics." Accessed 15/04/2015. http://www.eia.gov/cfapps/ipdbproject/iedindex3.cfm?tid=5&pid=53&aid=1.


Alomair, Osamah, and Maqsood Iqbal. 2014. "CO2 Minimum Miscible Pressure (MMP) Estimation using Multiple Linear Regression (MLR) Technique." SPE Saudi Arabia Section Technical Symposium and Exhibition.


Conglin Xu, Laura Bell. 2013. "Worldwide reserves, oil production post modest rise." Oil & Gas Journal Accessed 02/04/2015. http://www.ogj.com/articles/print/volume-111/issue-12/special-report-worldwide-report/worldwidereserves-oil-production-post-modest-rise.html.


Gu, Zhiqiang, and Milind Deo. 2009. Applicability of Carbon Dioxide Enhanced Oil Recovery to Reservoirs in the Uinta Basin, Utah (OFR-538).


Holm, LW, and VA Josendal. 1974. "Mechanisms of Oil Displacement By Carbon Dioxide." Journal of Petroleum Technology 26 (12):1,427-1,438.


Institute for 21st century energy, U.S. Chamber of Commerce. "CO2 Enhanced Oil Recovery."


Kasiri, N, and A Bashiri. 2011. "Wettability and Its Effects on Oil Recovery in Fractured and Conventional Reservoirs." Petroleum Science and Technology 29 (13):1324-1333.


Mathiassen, Odd Magne. 2003. "CO2 as injection gas for enhanced oil recovery and estimation of the potential on the Norwegian continental shelf." Trondheim, Norway.


Melzer, L Stephen. 2012. "Carbon dioxide enhanced oil recovery (CO 2 EOR): Factors involved in adding carbon capture, utilization and storage (CCUS) to enhanced oil recovery." Center for Climate and Energy Solutions.


Sean I. Plasynski, Darin Damiani. 2008. Carbon Sequestration Through Enhanced Oil Recovery. edited by U.S: Department of Energy National Energy Technology Laboratory.


Steve Whittaker, Ernie Perkins. 2013. Technical aspects of CO2 enhanced oil recovery and associated carbon storage.

Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56), October, 7-9, 2015, Linköping University, Sweden

Author:
L.B.J. Chathurangani, Britt M. Halvorsen
Title:
Near Well Simulation of CO2 Injection for Enhanced Oil Recovery (EOR)
DOI:
http://dx.doi.org/10.3384/ecp15119309
Note: the following are taken directly from CrossRef
Citations:
No citations available at the moment


Responsible for this page: Peter Berkesand
Last updated: 2017-02-21