Article | Proceedings of the 10<sup>th</sup> International Modelica Conference; March 10-12; 2014; Lund; Sweden | Consistent Simulation Environment with FMI based Tool Chain
Göm menyn

Title:
Consistent Simulation Environment with FMI based Tool Chain
Author:
Edo Drenth: Modelon AB, Ideon Science Park, Lund, Sweden Mikael Törmänen: Volvo Car Corporation, Dept. Complete Powertrain, G√∂teborg, Sweden Krister Johansson: Volvo Car Corporation, Dept. Complete Powertrain, G√∂teborg, Sweden Bengt-Arne Andersson: Modelon AB, Ideon Science Park, Lund, Sweden Daniel Andersson: Modelon AB, Ideon Science Park, Lund, Sweden Ivar Torstensson: Modelon AB, Ideon Science Park, Lund, Sweden Johan Åkesson: Modelon AB, Ideon Science Park, Lund, Sweden
DOI:
10.3384/ecp140961277
Download:
Full text (pdf)
Year:
2014
Conference:
Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden
Issue:
096
Article no.:
136
Pages:
1277-1283
No. of pages:
7
Publication type:
Abstract and Fulltext
Published:
2014-03-10
ISBN:
978-91-7519-380-9
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press; Linköpings universitet


Export in BibTex, RIS or text

Systems engineers face the ever increasing chase for reduced time to market; while the systems to develop ever increase in complexity. Software systems design and integration processes have therefor evolved along the well-known V-cycle.

This paper will focus on the software integration for mechatronic systems as they develop fast due to high demands and challenging requirements in the automotive industry.

The development order of model in the loop (MIL); software in the loop (SIL); processor in the loop (PIL) and hardware in the loop (HIL) can be seen as state of the art practised by many systems engineers. Driver in the loop (DIL) may be in its infancy; but rapidly growing.

The novelty presented in this paper is the consistency of the plant models used in the integration chain supporting consistent model data propagation: Functional Mock-up Units (FMU) defined by the open standard of the Functional Mock-up Interface (FMI).

Keywords: FMI; FMU; MIL; SIL; PIL; HIL; plant models; Modelica

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Edo Drenth, Mikael Törmänen, Krister Johansson, Bengt-Arne Andersson, Daniel Andersson, Ivar Torstensson, Johan Åkesson
Title:
Consistent Simulation Environment with FMI based Tool Chain
DOI:
http://dx.doi.org/10.3384/ecp140961277
References:

1. Blochwitz, T., Otter, M., Arnold, M., Bausch, C., Clauß, C., Elmqvist, H., Junghanns, A., Mauss, J., Monteiro M., Neidhold, T., Neumerkel, D., Olsson, H., Peetz, J.-V., Wolf, S., The Functional Mockup Interface for Tool independent Exchange of Simulation Models, 8th Modelica Conference, Dresden, Germany, 2011


2. Liebezeit, Bräuer, Serway, Junghanns: Virtual ECUs for developing automotive transmission software, 10th CTI Symposium Innovative Fahrzeug-Getriebe Hybrid- und Elektro-Antriebe, 5.-8.12.2011, Berlin, Germany


3. Junghanns, A., Virtual integration of Automotive Hard- and Software with Silver, Qtronic GmbH, Berlin


4. Andreasson, J., Andersson, D., Batteh, J., Gohl, J., Griffin, J., Krueger, I., Integrated simulation of a e4 WD vehicle using Modelica, Advances in Automotive Control, Volume#7, Part#1, 2013


5. FMI Toolbox User’s Guide 1.7, Modelon AB, Lund, Sweden, 2013


6. Functional Mock-up Interface for Model Exchange, Version 1.0


7. Functional Mock-up Interface for Co-Simulation, Version 1.0


8. https://www.fmi-standard.org/


9. Measurement, ECU Calibration, and Diagnostics ‚ÄďDevelopment Solutions for Automotive Embedded Systems, ETAS GmbH, Stuttgart, Germany, 2010

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Edo Drenth, Mikael Törmänen, Krister Johansson, Bengt-Arne Andersson, Daniel Andersson, Ivar Torstensson, Johan Åkesson
Title:
Consistent Simulation Environment with FMI based Tool Chain
DOI:
http://dx.doi.org/10.3384/ecp140961277
Note: the following are taken directly from CrossRef
Citations:
No citations available at the moment


Responsible for this page: Peter Berkesand
Last updated: 2017-02-21