Article | 13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden | A Scheme for Compressed Air Saving in Pneumatic Positioning Systems for High Loads
Göm menyn

Title:
A Scheme for Compressed Air Saving in Pneumatic Positioning Systems for High Loads
Author:
Luciano Endler: Laboratory of Hydraulic and Pneumatic Systems, Mechanical Engineering Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil Victor Juliano De Negri: Laboratory of Hydraulic and Pneumatic Systems, Mechanical Engineering Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil Eug ênio B. Castelan: Automation and Systems Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil
DOI:
10.3384/ecp1392a48
Download:
Full text (pdf)
Year:
2013
Conference:
13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden
Issue:
092
Article no.:
048
Pages:
485-494
No. of pages:
10
Publication type:
Abstract and Fulltext
Published:
2013-09-09
ISBN:
978-91-7519-572-8
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press; Linköpings universitet


Export in BibTex, RIS or text

This paper presents a structure of a compressed air saving for pneumatic positioning systems with capacity to move high loads. These structure uses the loads to save compressed air and thus increase the energetic efficiency of this systems. This configuration adds a fast switching on/off valve in a feedback between the cylinder chambers. With this type of configuration up to 58 % of compressed air saving can be achieve

Keywords: Pneumatic system; fast switching valve; energetic efficiency; position control

13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden

Author:
Luciano Endler, Victor Juliano De Negri, Eug ênio B. Castelan
Title:
A Scheme for Compressed Air Saving in Pneumatic Positioning Systems for High Loads
DOI:
http://dx.doi.org/10.3384/ecp1392a48
References:

[1] S V Krichel; O Sawodny; S H√ľlsmann; S Hirzel; and R Elsland. Exergy flow diagrams as novel approach to discuss the efficiency of compressed air systems. In Proceedings 8th International Fluid Power Conference Dresden; 2012.

[2] R Guenter; E A Perondi; E D DePieri; and A C Valdiero. Cascade controler pneumatic position systems with lugre model based friction compensation. Journal of the Braz. Soc. of Mech. Sci. & Eng.; 28:48‚Äď57; 2006.

[3] A C Valdiero; D Bavaresco; and P L Andrighetto. Experimental identification of the dead in proportional directional pneumatic valves. International Journal of Fluid Power; 27:27‚Äď34; 2008.

[4] P L Andrighetto; A C Valdiero; and L Carlotto. Study of the friction behavior in industrial pneumatic actuator. ABCM Symposium Series in Mecatronics ed Rio de Janeiro; 2:369‚Äď376; 2006.

[5] A Yang; J Pu; C B Wong; and P Moore. By-pass valve control to improve energy efficiency of pneumatic drive system. Control Engineering Pratice; 17:623‚Äď628; 2009.

[6] X Shen and M Gouldfard. Energy saving in pneumatic servo control utilizing interchamber cross-flow. Journal of Dynamic Systems; Measurement; and Control; 129:303‚Äď310; 2007.

[7] K A Al-Dakkan; M Gouldfard; and E G Barth. Energy saving control for pneumatic servo systems. In Proceedings
of the 2003 IEEE/ASME International Conference on Advanced Inelligent Mechatronics (AIM 2003); volume 1; pages 284‚Äď289; 2003.

[8] X Brun; D Thomasset; and E Bideaux. Influence of the process on the control strategy: application in electropneumatic field. Control Engineering Pratice; 10:727‚Äď725; 2002.

[9] J Hepke and J Weber. Improving energy efficiency of pneumatic handling systems. In Proceedings 8th International Fluid Power Conference Dresden; 2012.

[10] Y E Assaf and V J De Negri. Development of a high power pneumatic servo-positioning system for speed governors of hydraulic turbines. In Proceedings of the 19th International Congress of Mechanical Engineering; COBEM; Brasilia; Brazil; 2007.

[11] Y E Assaf and L G Oliveira V J De Negri. Applicability of servo-pneumatic positioning systems for high loads. In Bath/ASME Symposium on Fluid Power and Motion Control (FPMC 08); Bath; UK; 2008.

[12] ISO 6358. Pneumatic fluid power - component using compressible fluids. determination of flow rate caracteristics. 1989.

[13] C C Locateli; V J De Negri; and E R De Pieri. A servo-pneumatic positioning system driven by fast switching on/off valves. In Proceedings of the ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control; volume 2; pages 303‚Äď310; 2011.

[14] G F Franklin; J D Powell; and A Emani-Naeini. Feedback Control of Dynamic Systems. Prentice Hall; 1994.

[15] C C Locateli. Modelagem e desenvolvimento de um sistema de controle de posição pneumático com acionamento por válvulas on/off.Master’s thesis; Universidade Federal de Santa Catarina; Florianópolis; 2011.

13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden

Author:
Luciano Endler, Victor Juliano De Negri, Eug ênio B. Castelan
Title:
A Scheme for Compressed Air Saving in Pneumatic Positioning Systems for High Loads
DOI:
http://dx.doi.org/10.3384/ecp1392a48
Note: the following are taken directly from CrossRef
Citations:
No citations available at the moment


Responsible for this page: Peter Berkesand
Last updated: 2017-02-21