Article | The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007); 30-31 October; 2007; Göteborg (SÀrö) | Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions

Title:
Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions
Author:
Kourosh Mousavi Takami: Sharif institute of technology (TDI), Tehran, Iran \ MĂ€lardalen University, Sweden
Download:
Full text (pdf)
Year:
2007
Conference:
The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007); 30-31 October; 2007; Göteborg (SÀrö)
Issue:
027
Article no.:
023
Pages:
189-196
No. of pages:
8
Publication type:
Abstract and Fulltext
Published:
2007-12-21
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press; Linköpings universitet


Export in BibTex, RIS or text

Super heater elements concentrated in very high and clean power at temperature up to 1800 °c is needed for aluminium melting; oil drying equipment using for power transformers and same that material. There fore; always it is need to minimize power consumption and increase effectiveness at power reflector customers. This means to minimize heat losses in the High Power Reflector; and to optimize heat performance with respect to output power and temperature distribution. This can be done by altering the size and form of the insulating ceramic fiber to have as much power as possible ‘reflected’ out from the module. It can also be done by altering the size and form of the element .It has been done and the task solved mainly by heat transfer simulations; using COMSOL and MTLAB software’s. To minimize the number of different designs (and thus the number of calculations) were studied; it is also done that statistical methods for experimental design used to determine which designs should be used in the calculations. When an optimal solution has been found; it has been tested at factory’s facilities; with two reference designs.

Keywords: Reflector; simulation; element

The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007); 30-31 October; 2007; Göteborg (SÀrö)

Author:
Kourosh Mousavi Takami
Title:
Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions
References:

1. KANTHAL super electric heating element hand book


2. COMSOL Multiphysics version 3.3a software


3. Dennis; J.E.; Jr.; and R.B. Schnabel; NumericalMethods for Unconstrained Optimization and Nonlinear Equations; Prentice Hall; Englewood Cliffs; N.J.; 1983.

The 48th Scandinavian Conference on Simulation and Modeling (SIMS 2007); 30-31 October; 2007; Göteborg (SÀrö)

Author:
Kourosh Mousavi Takami
Title:
Simulation and Optimization of High Power Super Heater Reflector Usable in Electrical Furnaces for Heat Loss Reductions
Note: the following are taken directly from CrossRef
Citations:
No citations available at the moment